Outlet boxes Kramer Electronics
Here you can compare the prices for outlet boxes Kramer Electronics, get acquainted with photos and technical characteristics (for example Dispersible power, Attenuation, Connector 2, Ports quantity, Socket type, Center distance) and buy a liked model outlet boxes in one of the reliable online stores.
-
Product catalogs to browse
-
WP-211DS, 3 x VGA, 2 x 3.5mm
Active Wall Plate − 2x1 Computer Graphics Video Automatic Switcher
The WP−211DS is a high−performance wall plate switcher for computer graphics video signals with resolutions up to and exceeding UXGA and unbalanced stereo audio signals. When configured as a standby switcher, it switches to the secondary input upon loss of the primary input.
- High Bandwidth - 300MHz (−3dB).
- Automatic Standby Switching - Switches from the secondary input to the primary input when a signal is detected.
- Power Connect™ System - A single connection to the transmitter or the receiver powers both units. All system units must have the Power Connect system to use this feature.
- Front Panel Connections - 2 15−pin HD (F) and 2 3.5mm mini jacks (F).
- Rear Panel Connections - Terminal block outputs for stereo audio, contact closure control, RGBHV and twisted pair for computer graphics video.
- Looping Input - Input 1.
- Control - Automatic or contact closure switching and output disconnect with LED status indicator.
- ID Bit Control.
- System Range - CAT 5 up to 100m (320ft).
- Twisted Pair Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
- Dimensions - 16.2cm x 3.98cm x 11.4cm (6.38" x 1.57" x 4.49") US; 15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU W, D, H.
- Wall Plate Sizes - 2 gang EU, 3 gang US.
The WP−211DS is a high−performance wall plate switcher for computer graphics video signals with resolutions up to and exceeding UXGA and unbalanced stereo audio signals. When configured as a standby switcher, it switches to the secondary input upon loss of the primary input.
- High Bandwidth - 300MHz (−3dB).
- Automatic Standby Switching - Switches from the secondary input to the primary input when a signal is detected.
- Power Connect™ System - A single connection to the transmitter or the receiver powers both units. All system units must have the Power Connect system to use this feature.
- Front Panel Connections - 2 15−pin HD (F) and 2 3.5mm mini jacks (F).
- Rear Panel Connections - Terminal block outputs for stereo audio, contact closure control, RGBHV and twisted pair for computer graphics video.
- Looping Input - Input 1.
- Control - Automatic or contact closure switching and output disconnect with LED status indicator.
- ID Bit Control.
- System Range - CAT 5 up to 100m (320ft).
- Twisted Pair Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
- Dimensions - 16.2cm x 3.98cm x 11.4cm (6.38" x 1.57" x 4.49") US; 15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU W, D, H.
- Wall Plate Sizes - 2 gang EU, 3 gang US.
-
Payment Methods
We accept:
